DRAIN WARDEN
- Home
- /
- Drain Warden
The Drain Warden is an advanced sediment trap made from polypropylene Non Woven Geotextile Fabric, created by Geotextile Factory. It is designed to capture particles larger than 90 microns and is installed in stormwater drains beneath grates. With dimensions of :
- Length: 1300mm
- Width: 1300mm
- Height: 600mm
it effectively traps large amounts of sediment, aiding in compliance with environmental regulations, particularly in countries like Australia and New Zealand, where it is widely used.
In addition to being made from durable materials, the Drain Warden is also easy to install and remove, simplifying maintenance. Its adaptable design allows it to be trimmed to fit smaller drains, enhancing its usefulness in various settings. This combination of efficiency, ease of use, and flexibility makes it an essential component in urban water management and environmental protection efforts.
Drain Warden Installation Guide
- Remove the stormwater grate and clean drain opening and top lip of the This will ensure a better seal and improve the lifespan of your Drain Warden. Use a grate lifting device if necessary or have another person help you lift the grate.
- Rest the grate on its side and tie the Drain Warden onto the underside of the If supplied, tie the absorbent boom onto the grate so it falls in the center of the basin.
- Replace the grate back into the drain pit. Pull on the edges to of the fabric to give the best fitting around the drain. Check the ties again to make sure they are tight on the
- With a cutting tool, trim excess material flush with the grate leaving at least 50mm overhang. If a large gap remains between the grate and the concrete shoulder, fold over the excess geotextile and fold back under to form a filler in the
- Ensure the grate is correctly replaced and flush to ground level and does not create a trip
What is a drain warden?
A Drain Warden is a specialized device used to prevent pollutants, debris, and sediment from entering drainage systems, particularly in urban environments. It is typically installed in stormwater drains beneath grates and acts as a barrier, trapping particles like litter, leaves, and sediment before they can flow into larger water systems. Made from durable materials such as geotextile fabrics, Drain Wardens are designed to improve water quality and assist in meeting environmental regulations by reducing the amount of harmful waste reaching rivers, lakes, and oceans.
How effective are Drain Wardens in heavy rain?
Drain Wardens are generally effective in filtering sediment and debris during regular rainfall, but their performance in heavy rain can vary. In intense downpours, the large volume of water flowing through storm drains can overwhelm the capacity of a Drain Warden, especially if it’s clogged with debris or sediment. This can lead to water bypassing the filter or even causing backups in the drainage system.
However, when properly maintained and not overloaded, Drain Wardens can still be effective in capturing pollutants during heavy rain. Regular maintenance, including clearing accumulated debris, is crucial to ensure optimal performance. Some models are designed to handle higher flow rates, but they still have limits, especially during extreme weather events.
How durable is the Drain Warden?
The Drain Warden is designed to be highly durable, typically constructed from strong, long-lasting materials such as polypropylene nonwoven geotextile fabric. These materials are resistant to wear and tear, UV exposure, and chemical degradation, making the Drain Warden suitable for prolonged use in harsh urban environments. Its durability ensures that it can withstand varying weather conditions, including rain, heat, and cold, without significant degradation.
However, the lifespan and effectiveness of a Drain Warden also depend on regular maintenance, such as cleaning out accumulated debris and checking for any signs of damage. With proper upkeep, a Drain Warden can last for several years, making it a cost-effective solution for urban water management and environmental protection.
Can the Drain Warden handle heavy rain?
The Drain Warden is designed to capture sediment, debris, and pollutants in typical rain conditions, but its ability to handle heavy rain depends on several factors, such as its size, design, and how well it’s maintained. In heavy rain, large volumes of water can flow through storm drains rapidly, potentially overwhelming the Drain Warden’s capacity, especially if it has accumulated debris. This could lead to water bypassing the filter or causing temporary flooding.
That said, many Drain Wardens are designed to handle high flow rates up to a certain limit, and when properly maintained—regularly cleaned of debris and sediment—they can remain effective even in heavy rain. However, extreme rainfall or storm conditions may exceed the capabilities of a Drain Warden, reducing its effectiveness. Regular maintenance is key to ensuring that it functions optimally during heavy rain events.
What are the environmental benefits of using a Drain Warden?
The use of a Drain Warden offers several important environmental benefits:
- Prevents Water Pollution: By capturing debris, sediment, and pollutants such as litter, oil, and chemicals before they enter stormwater systems, the Drain Warden helps prevent contamination of rivers, lakes, and oceans. This is crucial for protecting aquatic ecosystems and maintaining water quality.
- Reduces Sediment Build-up: Sediment that accumulates in water bodies can harm aquatic habitats by clouding the water, which disrupts photosynthesis and affects the food chain. The Drain Warden helps reduce this sediment flow, preserving healthier ecosystems.
- Minimizes Plastic and Trash in Oceans: By filtering out plastic waste and other trash from storm drains, the Drain Warden contributes to reducing the amount of plastic that reaches the ocean, protecting marine life from harmful waste.
- Supports Environmental Compliance: In many regions, environmental regulations require the reduction of pollutants in stormwater. The Drain Warden aids cities and industries in meeting these regulations, promoting more sustainable urban development.
- Flood Prevention: By capturing debris that might otherwise clog stormwater systems, the Drain Warden helps maintain proper drainage flow, reducing the likelihood of blockages that can lead to flooding during heavy rain events.
Overall, the Drain Warden plays a key role in urban water management by supporting cleaner, healthier environments and reducing human impact on natural water bodies.